Machine Studies
Draft Schedule for Run01-7, 2007
March 12th 0800 - March 14th 0800
Time |
Descriptions |
Studiers |
SR Status |
|
Monday, 3/12/07 |
|
|
0800-0810 |
Collect XBPM orbit data |
OPS |
Stored Beam & Injection |
0810-1000 |
Measure main ramping supplies output |
Puttkammer |
No Injection |
0810-0900 |
Reboot RTFB IOCs |
Lenkszus |
No Beam |
0810-0900 |
Check S26 ID linear encoders & check 23BM vacuum |
Smith |
May affect control law |
0810-0900 |
Replace BO amplifier |
Gold |
No Injection |
0810-0900 |
Check ref & fwd RF power readings |
Horan |
No Beam |
0810-0900 |
Switch from RF-3 to RF-2 |
RF group |
No Beam |
0830-1000 |
Debug video sync for 35-BM pinhole camera |
Yang |
Access Zone F |
0830-1000 |
Map L6 to L3 waveguide run |
Grelick |
Access Linac |
0900-1000 |
Reset xbpm stage limits 9IDP1X |
Hahne |
Access Zone B |
1000 |
Standardize to symmetric lattice and inject 100 mA. |
OPS Sajaev |
|
1000-1100 |
Test rebooter PEM |
Soliday/Flood |
Limited Injection |
1100-1200 |
Investigate ramp corruption after reboot |
Fors |
Limited Injection |
1000-1200 |
Test P0 feedback drive. Parallel to ramp investigation and PEM tests. |
Yao |
Stored beam |
1000-1200 |
Switch orbit correction configurations to symmetric lattice. Parallel to P0 feedback. |
Emery |
Stored beam |
1200-1300 |
ID32 shielding verification |
Ramanathan |
Stored Beam & Injection |
1300 |
Inject 100 mA. |
OPS |
Stored Beam & Injection |
1300-1700 |
Linac studies with PC gun and kicker validation. |
Pasky |
No injection |
1300-1700 |
Measure sextupole offsets (parallel to linac studies). |
Emery Sajaev |
Stored beam |
1700-2000 |
Orbit setup for symmetric lattice. |
Singh |
Stored Beam & Injection |
2000-2300 |
Recover bunch cleaning system. |
Yao Yang |
Stored Beam & Injection |
2300-2400 |
Xbpm studies. |
Decker |
Stored Beam & Injection |
|
Tuesday, 3/13/07 |
|
|
0000-0500 |
Xbpm studies (continued). |
Decker |
Stored Beam & Injection |
0500-0700 |
SR training. |
Poncin |
Stored Beam & Injection |
0700-0900 |
BPM noise measurement. |
Singh Keane |
Stored Beam & Injection |
0900-1100 |
S38B:P1 and S18A:P1 tests. |
Singh Sun |
Stored Beam & Injection |
0900-1100 |
Test new linac controllaw PV logic. Parallel to bpm tests. |
Sereno |
Limited injection |
1100-1400 |
P0/P1 calculation tests. |
Singh |
Stored Beam & Injection |
1400-1500 |
Optimize ID5 steering. Parallel to linac studies. |
Schroeder |
Stored Beam & Injection |
1500-1700 |
CPU work. |
Emery |
Stored Beam & Injection |
1700-2100 |
ID feedforward work. |
Emery |
Stored Beam & Injection |
2100-2400 |
Accumulation limit and microwave instability. |
Yao Chae |
Stored beam & injection |
|
Wednesday, 3/14/07 |
|
|
0000-0100 |
Accumulation limit (continued) |
Yao Chae |
Stored beam & injection |
0100-0500 |
Single bunch current scan for impedance characterization. |
Chae Sajaev |
Stored beam & injection |
0500-0700 |
SR training. |
Poncin |
Stored beam & injection |
0700-0800 |
Prepare for User beam |
OPS |
Stored Beam & Injection |