Machine Studies
Schedule for Run01-5, 2009
February 23th 0800 - February 25th 0800
Time |
Descriptions |
Studiers |
SR Status |
|
Monday, 2/23/09 |
|
|
0800-0810 |
Collect XBPM orbit data |
OPS |
Stored Beam & Injection |
0810-0900 |
Gap Scans and update IDGapFF look-up tables |
Schroeder |
Stored Beam & Injection |
0900-1100 |
Study booster ramp waveform corruption problem
|
Xu |
No SR Injection |
0900-1000 |
Add timing signal from iocinjtime to A015 |
Laird |
No Beam |
0930-1030 |
Switch from RF3 to RF2 |
RF Group |
No Beam |
0930-1100 |
Investigate DAS DSP to Main DSP errors |
Lenkszus |
No Beam |
0930-1130 |
Investigate window water flows |
RF group |
Access Linac |
0930-1330 |
Repair pnuematic actuator on S39VV01 |
Gagliano |
Access Zone F |
1000-1030 |
Check cable installation route for S35 stripline |
Yao, Gold |
Access Zone E |
0900-1100 |
Investigate and fix P4EK power supply. |
PS group |
No beam past PAR |
0900-1200 |
CPU corrector tests. |
Smith Deriy |
No SR beam |
1130-1230 |
Linac training. |
Thomas |
Limited Injection |
1230-1330 |
Linac training. |
Weyer |
Limited Injection |
1330-1500 |
Recover SR beam and SR training. |
OPS Karl |
Stored Beam & Injection |
1500-1700 |
Test orbit switching PEM. |
Sajaev Shang |
Stored Beam & Injection |
1700-1900 |
Setup hybrid mode. |
Sajaev/Harkay |
Stored Beam & Injection |
1900-2300 |
CPU AC correction. |
Xiao |
Stored Beam & Injection |
1900-2000 |
Setup and test PAR operation. Parallel to CPU correction. |
Yao |
No injection. |
2300-2400 |
Orbit switch from 24 singlets to hybrid. |
Decker Sajaev |
Stored Beam & Injection |
|
Tuesday, 2/24/09 |
|
|
0000-0300 |
Orbit switching (continued). |
Decker Sajaev |
Stored Beam & Injection |
0300-0700 |
BPM calibration studies at S35. |
Decker Yang |
Stored Beam & Injection |
0700-0900 |
SR training. |
Karl |
Stored Beam & Injection |
0900-1300 |
CPU AC correction. |
Xiao |
Stored Beam & Injection |
0900-1100 |
Linac training. Parallel to CPU correction. |
Weyer |
Limited Injection |
1100-1300 |
Linac training. Parallel to CPU correction. |
Thomas |
Limited Injection |
1300-1500 |
Setup S36A:H1 and S36A:H2 dummy loads. |
PS group |
No SR beam |
1300-1500 |
Linac beam studies. |
Pasky |
Limited injection |
1500-1800 |
Test SR FPGA based tune measurement system. |
Yao Norum |
Stored Beam & Injection |
1800-2200 |
P0 feedback studies. |
Yao Sajaev |
Stored Beam & Injection |
2200-2400 |
Bunch by bunch tune measurements. |
Chae Yao Harkay |
Stored Beam & Injection |
|
Wednesday, 2/25/09 |
|
|
0000-0200 |
Bunch by bunch tune measurements (continued). |
Chae Yao Harkay |
Stored Beam & Injection |
0200-0630 |
Study of bunch patterns for future 200 mA test. |
Harkay |
Stored Beam & Injection |
0630-0800 |
Prepare for User beam |
OPS |
Stored Beam & Injection |