Machine Studies
Draft Schedule for Run01-3, 2015
February 17th 0800 - February 18th 0800
Time | Descriptions | Studiers | SR Status |
| Tuesday, February 17, 2015 |
|
|
0800-0810 | Collect XBPM orbit data | OPS | Stored Beam & Injection |
0810-0930 | Gap Scans and update IDGapFF look-up tables | Schroeder | Stored Beam & Injection |
0930-1000 | Switch back to pumps 509, 301 | Wright | No Beam/Injection |
0930-1030 | Replace sideband detector at RF-2 | RF group | No Beam |
0930-1030 | Update iocs27fb | Lenkszus | No Beam |
0930-1130 | Vibrations measurements PSR30 pump | Preissner, Swetin | No Beam |
0930-1130 | Investigate Gespac errors in S4:5 raws | Puttkammer | No Beam |
0930-1130 | Swap converters in S21 | Vargas | No Beam |
0930-1130 | Measure water flows in Zone D raws | Goetzen | No Beam |
0930-1300 | Perform measurements on PAR RF-12 | RF Group | No Injection |
1000-1100 | Install new ramps for QD/QF | Yao | No Injection |
1000-1300 | Characterize RG1 / laser alignment | Dooling | Access Linac |
1000-1200 | Test 4x4 feedback matrix setup in S27 | Sereno | No Beam |
1030-1100 | Check ID5 calibration | Merritt | Access Zone A |
1300-1600 | Xbpm alignment | Hahne | Stored Beam & Injection |
1600-1700 | Test P0 feedback setup application | Yao/Shang | Stored Beam & Injection |
1700-1900 | Test new bpm calibration factors for ID4 P0 bpms | Sereno | Stored Beam & Injection |
1900-2100 | Tune scan on lifetime and injection efficiency | YiPengSun/Emery | Stored Beam & Injection |
2100-2400 | Tune up RG2 beam | YinESun | Limited Injection |
2100-2400 | IEX coupling correction | Xiao | Limited Injection |
| Wednesday, February 18, 2015 |
|
|
0000-0300 | IEX coupling correction | Xiao | Limited Injection |
0000-0300 | Constant-tune QD/QF ramp | Yao | Booster beam only |
0300-0700 | Hybrid setup | Sajaev | Stored Beam & Injection |
0700-0800 | Prepare for User beam | OPS | Stored Beam & Injection |