Time

Descriptions

Studiers

SR Status

Friday, July 3, 2015

0800-0810

Collect XBPM orbit data

OPS

Stored Beam & Injection

0810-1000

Gap Scans and update IDGapFF look-up tables

Schroeder

Stored Beam & Injection

1000-1400

Booster chromaticity measurement and tuning.

Harkay, Yao

No SR studies

1400-1700

Booster BSP 100 response measurement (injection possible)

Yao

Stored Beam

1700-2100

Orbit switch to 324 singlets

Xiao

Stored Beam & injection

2100-2300

OPEN

2300-2400

SR operator training(2300-1100)

Frausto

Stored Beam & injection

Saturday, July 4, 2015

0000-0400

single bunch lifetime while polarization is occuring. remotely

Emery

Stored Beam & injection

0400-1600

OPEN

1600-2400

investigate CPU coupling variation

Xiao

Stored beam & occ. injection

Sunday, July 5, 2015

0000-0200

SR operator training(2300-1100)

Frausto

Stored Beam & injection

0200-0800

Beam Spectra recording (remotely)

Sajaev

Stored Beam & Injection

0800-0900

27-ID orbit feedback test for user operations

Yang, Sereno

Stored beam & injection

0900-1500

Compton XBPM studies (shutter permit needed)

Yang, Sereno

Stored beam & injection

1500-1900

SCU1 BLM calibration, single bunch

Harkay, Dooling

Stored beam & injection

1900-2400

SCU0: simulate 130 mA (Cu bar heater), 650 A coil current, measure LHe pressure. 100 mA, 24 bunches, topup

Harkay, OPS

Stored beam & injection

Monday, July 6, 2015

0000-0500

SCU0: simulate 130 mA (Cu bar heater), 650 A coil current, measure LHe pressure. 100 mA, 24 bunches, topup (continued)

Harkay, OPS

Stored beam & injection

0500-0700

SR operator training(2300-1100)

Frausto

Stored Beam & injection

0730-0800

Shutdown P.S. (including raws) affected by process water pump trips in S1-6

OPS

No beam

0800-1200

Shut down Emergency Motor Control Center X1-1 (EMCC-X1-1) and install exhaust fan in S2 (PW pumps S1-6 may be affected, AHU 501&502 affected, etc)

Stevens, Andy

No beam

0800-0830

Prepare for Zone F Access

OPS

No beam

0800-1100

Troubleshoot iocrfcavs36

DiMonte, Sluiter

No beam

0800-1100

Test device support on RF1 amplifier with ACIS tripped

DiMonte

No beam

0830-1100

Replace blower for RF S38Cav1 & S40Cav2

McKenzie, Pace

Zone F Access

0800-1000

Swap out SR Quads for IGBT upgrade in sector 10:11

Ackley

No beam

0800-1000

Repair water leak in sector 23 cabinet 1

Vargas

No beam

0800-0830

Reset the Interleaving power supplies DSP’s

Donkers

No beam

0800-0900

Check the Linac BPM timing fiber signal

Keane

No Linac Beam

0900-1200

PAR ion effect study

Yao, Harkay, Calvey

No SR beam

1200-1400

PAR phase shifter investigation

Emery, Lenkszus, DiMonte

Stored beam & injection

1400-1600

Verify orbit after phase shifter problem corrected

Xiao

Stored beam & injection

1600-2000

Diamond blade thermal imaging studies at 24-ID (shutter permit needed)

Yang

Stored beam & injection

2000-2400

Mombo Scans

Sereno

Stored beam & injection

Tuesday, July 7, 2015

2400-0200

SR operator training(2300-1100)

Frausto

Stored Beam & injection

0200-0600

single bunch lifetime while polarization is occuring. remotely

Emery

Stored Beam & injection

0630-0800

Prepare for User beam (324 singlets)

OPS

Stored Beam & Injection